inner banner
WHAT'S UPDATED

Material Technical Data

Premium Fabric Material of Nanosox HVAC Duct System >>>

Ten Permeability

Nanosox HVAC duct adopts Unique micro-permeability technology - Small Permeability as 3.6 m3/m2/h (0.2 cfm/ft2) is available to strike a proper balance between anti-condensation and energy-saving, only a small percentage of airflow is permeated from fabric surface for anti-condensation, most air is discharged from precisely calculated orifice towards the targeted area in a very fast pace, which reduces energy wasting at high space.


diverdified-project-application.jpg  


Material Property & Product Performance Indicator/Nanosox-N series of Nanosox HVAC Duct system >>>

Property
ItemsApplicationRequirementIndexCode complianceRemarks
Material propertyPermeationError rate of permeation index <5% (under 125pa or at 0.5w.g)Ventilation area: e.g. gym ventilationNon-permeable Omm/sGB/T5453-1997National textile products quality supervision and inspection centerTo make sure the air dispersion performance, the permeability should be selected carefully according to the installation height, air volume, air pressure and condensation free and energy saving
High and large space/space with fast end air velocityMicro-permeability 1,2,5mm/s
Middle or low space/space with slow end air velocityMedium-permeability 10,20,30mm/s
Low space/slow end air velocityLarge-permeability 40,80,100mm/s
Fire safetyBAbove the groundWash durability 50 times B-s1,d0, t0 Smoke Toxicity ZA Class1

GB 8624-2012

GB20286-2006

EN13501-1:2007

National fireproof construction material quality supervision and inspection centerProduct quality tracking; Certification of fire retardant identity in public places Wash durability 50 times
A2High-rise/basement/strict fire safety spaceA2-s1,d0,t0GB 8624-2012National fireproof construction material quality supervision and inspection centerFormal testing
Other physical propertiesClean and fiber sheddingAll application areaNo particle detachmentAc167 and UI181ULFormal testing
Mildew resistanceAll application areaDuring the 60 days UL 181 test, no microbial breakage or decomposition
Health and safety of textilesAll application areaPH4.0-7.5 Formaldehyde content<=20mg/kg no peculiar smell.GB18401-2003National textile products quality supervision and inspection center
Product PropertyPressure resistance
Under the static pressure of 1900pa,no change of the sampleNo changeAc167 and UL 187ULFormal test and approval


Material Property & Product Performance Indicator/Insusox-I series of Insusox Fabric Ductwork system

Property ItemsIndexResutsCode compliance
Material PropertyFire safetyB/S1/d0/t0 Class 1&Class0B1(B-s2,d0,t0)GB8624-2012 EN13501-1:2007 UL 2518 BS 476-6,7:1997
Thermal conductivity0C(average temperature),<=0.0360.033GB/T 17794-2008 ASTMC 177/C518-10
Moisture Permeabilitywater vapor permeability<=1.3 X 10 -10g/(s.m.Pa)1.0 x 10^-10ASTME96-10
Moisture resistance factor>=1.5x10^32 x 10^4ASTEM96-10
Water absorption(by volume)<=0.3%0.17%ASTMC209-07
Product performancePressure resistanceWhen the pressure reaches 2000pa, the product is normal without any breakageNo changeAC 167 & UL 181
Air leakage volume (m^3/h.m^2)When inner static pressure is 5000pa, the leakage per unit area Qa<=3

0.31

1.34

JGJ141-2004
When inner static pressure is 1000pa, the leakage per unit area Qa<=1.57
DurabilityAir leakage after durability test is less than 80% of the air leakage before the best37%JG/T258-2009
Anti-condensationThere is no condensation at the duct surface, flange joint, and support reinforcementCondensation freeJG/T258-2009